User Tools

Site Tools


samples:src:xdk:vb:viewer:assemblyinfo_vb

AssemblyInfo.vb source

Documentation | Samples | Viewer | Sources | AssemblyInfo.vb

XDK Visual Basic sample source code.

Imports Microsoft.VisualBasic
Imports System.Reflection
Imports System.Runtime.CompilerServices
Imports System.Runtime.InteropServices
 
'
' General Information about an assembly is controlled through the following 
' set of attributes. Change these attribute values to modify the information
' associated with an assembly.
'
<Assembly: AssemblyTitle("")>
<Assembly: AssemblyDescription("")>
<Assembly: AssemblyConfiguration("")>
<Assembly: AssemblyCompany("")>
<Assembly: AssemblyProduct("")>
<Assembly: AssemblyCopyright("")>
<Assembly: AssemblyTrademark("")>
<Assembly: AssemblyCulture("")>
 
'
' Version information for an assembly consists of the following four values:
'
'      Major Version
'      Minor Version 
'      Build Number
'      Revision
'
' You can specify all the values or you can default the Revision and Build Numbers 
' by using the '*' as shown below:
 
<Assembly: AssemblyVersion("1.0.*")>
 
'
' In order to sign your assembly you must specify a key to use. Refer to the 
' Microsoft .NET Framework documentation for more information on assembly signing.
'
' Use the attributes below to control which key is used for signing. 
'
' Notes: 
'   (*) If no key is specified, the assembly is not signed.
'   (*) KeyName refers to a key that has been installed in the Crypto Service
'       Provider (CSP) on your machine. KeyFile refers to a file which contains
'       a key.
'   (*) If the KeyFile and the KeyName values are both specified, the 
'       following processing occurs:
'       (1) If the KeyName can be found in the CSP, that key is used.
'       (2) If the KeyName does not exist and the KeyFile does exist, the key 
'           in the KeyFile is installed into the CSP and used.
'   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
'       When specifying the KeyFile, the location of the KeyFile should be
'       relative to the project output directory which is
'       %Project Directory%\bin\<configuration>. For example, if your KeyFile is
'       located in the project directory, you would specify the AssemblyKeyFile 
'       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
'   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
'       documentation for more information on this.
'
<Assembly: AssemblyDelaySign(False)>
<Assembly: AssemblyKeyFile("")>
<Assembly: AssemblyKeyName("")>
 
'
' Use the attributes below to control the COM visibility of your assembly. By
' default the entire assembly is visible to COM. Setting ComVisible to false
' is the recommended default for your assembly. To then expose a class and interface
' to COM set ComVisible to true on each one. It is also recommended to add a
' Guid attribute.
'
 
<Assembly: ComVisible(False)>
'[assembly: Guid("")]
'[assembly: TypeLibVersion(1, 0)]

Full source code available upon product installation.

2017/12/05 09:12

Page Tools