User Tools

Site Tools


doc:project-files-format-legacy:3d

3D related parameters

Documentation | Other Specifications | Project file format (legacy) | 3D

This section includes 3D parameters

Layer3D

Layer3D=Parameter

Type of layer interpretation. Can be set to force different interpretation then default.

Parameters Description
Namelayer will be represented as 2D
Demforced interpretation as an elevation model
Shapesforced interpretation as 3D shapes

Applies to Layer.

Ground

Ground=Parameter

Specify how Z values are referenced to the DEM

ParametersDescription
OnDemZ values will be equal to DEM value at the point
AboveDemZ value represents Z + DEM value at the point
AboveZeroZ value relates to 0

Applies to Layer.

Basement

Basement=Parameter

Specify how all values of the shapes referenced to the DEM valid only to Ground=OnDem

Parameters Description
Offshape will not be altered to the basement
Lowestall Z values will be equal to the value represent lowest point of the shape on the DEM;
used to force for example all building laid out on the DEM to have a flat basement

Applies to Layer.

FalseZ

FalseZ=Parameter

Forced Z value

Parameters Description
Floatfloat value; 0 is default;
decimal point should be represented as dot (.)

Applies to Layer.

FalseM

FalseM=Parameter

Forced M value (for shapes with measured values)

Parameters Description
Floatfloat value; 0 is default;
decimal point should be represented as dot (.)

Applies to Layer.

ScaleZ

ScaleZ=Parameter

Scaling of the Z value

Parameters Description
Floatfloat value; 1 (default) means that scale is 100%; decimal point should be represented as a dot (.)

Applies to Layer.

ScaleM

ScaleM=Parameter

Scaling of M value (for shapes with measure values)

Parameters Description
Floatfloat value; 1 (default) means that scale is 100%; decimal point should be represented as a dot (.)

Applies to Layer.

2019/12/18 10:45

Page Tools